Slave Wheels

[Keep it stiff]

My SV is a tad to wide at the rear to fit on my BJ Minno. I want to get hold of a pair slave wheels, just to use for getting on/off the trailer. Is their a standard production car with steel or allow wheels that would have the correct PCD and spacing to clear the callipers?

[HustleRussell]

Assume you have Ford PCD hubs which are 4 x 108mm if I remember rightly. Quite common, if I were you I'd just search 4x108 on eBay and set the condition filter to 'used', it'll come up with loads of old used steels. Bigger offset the better (within reason). Remember to check the center bore will fit as well.

[radical78]

go to a scrap yard and get space saver spare wheels from a modern ford

[TeflonT]

Make some on a routing table out of MDF..... Its been done before....

[Yellow 7]

Scrap yard - Citroen ZX steel wheels. Same PCD and nut / bolt dishing.
Narrow as you need.

[Keep it stiff]

Cheers all, off the the breakers this weekend then.