Caterham 96' - Anyone HELP With Timing in Honiton, Devon?

[PaulRudler]

Hi Guys,

In my muppetry I have messed up the timing of my 96 Sprint. If anyone lives near Honiton in Devonthat may be able to pop in and help - there will be some beer tokens in it for you.
Please call Paul - 07429 979001.

Background. Caterham stood for a while. Changed plugs and leads. Autospares guy wanted to look at distributer cap. As this was electronically modified he also wanted the Rotor too. None the less during this process the timing is now out.

[johnny7]

Did you remove the distributor? -or did you undo the distributor clamp bolt and move the distributor? If not then the timing should be unaltered.

[TeflonT]

Or is the rotor arm broken - the slit disc breaks away from the plastic....

[one eyed mick]

Plug leads on in correct order?

[DKL]

Paul,
Have you tried L7C? There is a pretty good following down there and I'm sure someone could help.

[TeflonT]

Seek out Paul Jacobs in Taunton. He's a nice chap and I' sure he'll be able to help you.

[PaulRudler]

Hi guys! Thanks for all your help. Turns out that quite a lot needs looking at so have opted for a re-build. Special thanks to Dave who has offered to help and all the advice he has given so far. I will start another thread of the build when we get underway.

Kind regards,

Paul