Friday the 13th luck - Xbox has blown up!
Friday the 13th luck - Xbox has blown up!
Author
Discussion

Mastodon2

Original Poster:

14,322 posts

194 months

Friday 13th July 2012
quotequote all
Is there a worse time to find out your xbox has given up the fight than 16:15pm on a Friday night, after a long, hard week at work?

A few weeks ago my xbox 360, which is about as old as xboxs get, I bought it when it first came out, started to act as though it didn't have a disc in the tray, and would display the "Open tray" text instead of "Play game". A few goes at opening and shutting the the tray would usually fix it, and it would spin the disc up and play it. It had been slowly getting worse, at times taking up to 10 minutes of trying to finally read the disc.

Now, it's gone for good I fear, I have been trying on and off since I got in from work and it's just telling me one thing - "No Battlefield 3 for you tonight, lad". What a pain in the arse, typical Friday 13th luck! This console has beaten the red ring of death two or three times now, each time being shipped off to Microsoft for repair , but now it's well past it's extended warranty and dead in the water. Oh well, looks like I'm off to get a new one on the morning then. Saying as the Xbox720 has been confirmed by Microsoft and is rumoured to be out next year (2014 more likely imo) the 360 to replace this useless paperweight I've got now does not have to last very long.

Any ideas what to do with the old one? Novelty door stop?

CBR JGWRR

6,583 posts

178 months

Friday 13th July 2012
quotequote all
Power supply cable still good?

Mine's gone bust...

Mastodon2

Original Poster:

14,322 posts

194 months

Friday 13th July 2012
quotequote all
Yeah power supply is good, literally everything is working perfectly other than the disc drive, which is acting like it's empty when it's not.

Big Fat Fatty

3,315 posts

185 months

Friday 13th July 2012
quotequote all
Replace the drive, if you know anyone good at that sort of stuff who could do it cheap it'd be the best thing to do imo.

Mine does exactly the same thing, it's a 4 year old 120Gb Elite, and has been getting worse for some time so you're not alone mate.

CBR JGWRR

6,583 posts

178 months

Friday 13th July 2012
quotequote all
Mastodon2 said:
Yeah power supply is good, literally everything is working perfectly other than the disc drive, which is acting like it's empty when it's not.
Is it this sort of Xbox end?




sparks_E39

12,738 posts

242 months

Friday 13th July 2012
quotequote all
They are really cheap brand new now.

Mastodon2

Original Poster:

14,322 posts

194 months

Friday 13th July 2012
quotequote all
CBR JGWRR said:
Is it this sort of Xbox end?

I will have a look later and post back tomorrow, but I'm fairly sure that is the end it has.

CBR JGWRR

6,583 posts

178 months

Friday 13th July 2012
quotequote all
Mastodon2 said:
I will have a look later and post back tomorrow, but I'm fairly sure that is the end it has.
Ok, thanks.

Mastodon2

Original Poster:

14,322 posts

194 months

Saturday 14th July 2012
quotequote all
CBR JGWRR said:
Ok, thanks.
Yep, that's one. It' a couple of years old, it was replaced the last time I sent my xbox away to get the red ring of death fixed. You can have it if you are willing to pay for the price of postage and a jiffy bag to send it in, PM me if you want to go ahead with this.

93Jay

3,383 posts

193 months

Saturday 14th July 2012
quotequote all
It'll still work, after you put the disk in tap the top of the Xbox where the drive is just before the disk is about to spin, couple of light taps and it'll work, I ran my xbox for a while when it had this problem.

Mastodon2

Original Poster:

14,322 posts

194 months

Saturday 14th July 2012
quotequote all
Believe me, I scoured the internet for every trick to get it to work, but it really had reached the point of no return, it was open it, strip the thing down and clean the laser, check the motors for the drive's in/out function are not burned out etc, but that just seemed like hassle. After all, it's a few years since it last RROD'd, so that will not have been far off on the horizon for it any way.

Riknos

4,701 posts

233 months

Monday 16th July 2012
quotequote all
Mastodon2 said:
Believe me, I scoured the internet for every trick to get it to work, but it really had reached the point of no return, it was open it, strip the thing down and clean the laser, check the motors for the drive's in/out function are not burned out etc, but that just seemed like hassle. After all, it's a few years since it last RROD'd, so that will not have been far off on the horizon for it any way.
Easier way of fixing this - I'll PM you wink