How to remove a disc from a dead PS3?
How to remove a disc from a dead PS3?
Author
Discussion

BorkFactor

Original Poster:

7,278 posts

187 months

Thursday 20th September 2012
quotequote all
Today was a very sad day, my PS3 got the so called "yellow light of death" and is now dead. When you turn it on, about 3 seconds later the yellow light flashes and then it shuts down and shows a blinking red light.

Now, in it's final hours the console swallowed a disc (flatmate said it died in the middle of a game) and we haven't been able to get it out despite our best efforts.

I have tried the "fan cycle" thing, where you turn it on holding the eject button, tried tapping the eject button, but nothing happens.

Short of breaking the fker open with a hammer, what can I do? I don't fancy sending it away to get fixed and rescued as my flatmate is bringing his PS3 up this weekend.

Any help would be great!

Rowan138

230 posts

180 months

Thursday 20th September 2012
quotequote all
http://www.llamma.com/PS3/repair/PS3_disassembly_t...
keep going until the disc drive is removed then pop the drive open.

BorkFactor

Original Poster:

7,278 posts

187 months

Thursday 20th September 2012
quotequote all
Dear lord, that looks like scary stuff!

Well, its fked now so I might as well give it a bash. I will let you know how I get on smile

Devilstreak

8,088 posts

210 months

Thursday 20th September 2012
quotequote all
A hammer and lots of swearing is better, I promise you that!


BorkFactor

Original Poster:

7,278 posts

187 months

Thursday 20th September 2012
quotequote all
Devilstreak said:
A hammer and lots of swearing is better, I promise you that!
That is plan B hehe

Just noticed it has these silly torx screws and I don't have a suitable screwdriver. Lets hope the local hardware store has them in stock, or the drill will be coming out.

marshalla

15,902 posts

230 months

Thursday 20th September 2012
quotequote all

Devilstreak

8,088 posts

210 months

Thursday 20th September 2012
quotequote all
The torx screw was exactly the reason I just smashed it to pieces!

I sat down with all fiddly screwdrivers ready to do it properly, but didn't have a torx. Disc was out in 5 minutes and I was at the shop buying a new Ps3 5 minutes after that hehe

P-Jay

11,401 posts

220 months

Thursday 20th September 2012
quotequote all
Frankly it's now a couple of kilos of dead plastic, set about with with screwdriver until the reach the disc, what the worst that could happen, break it more?

EDLT

15,421 posts

235 months

Thursday 20th September 2012
quotequote all
Hammer on the corner, it'll crack like a £300 plastic nut.

BorkFactor

Original Poster:

7,278 posts

187 months

Thursday 20th September 2012
quotequote all
marshalla said:
Sadly not, mine is an old 60GB PS3, one of the very first ones! Thanks anyway smile

I have bought some multi tool thing that has lots of torx screwdrivers on them so hopefully all will be fine! I am quite interested to see what the insides are like, even if I don't understand any of it! I will try and take apart as much as I can properly, and maybe even put it back together.

Hammer is at the ready though.

Aphex

2,160 posts

229 months

Thursday 20th September 2012
quotequote all
They're really simple to take apart and put back together. I used a youtube guide the first time. It came apart 4 more times after that before I threw in the towel

Stedman

7,458 posts

221 months

Thursday 20th September 2012
quotequote all
Very easy to take apart, min your fingers or thumbs on the DVD case though! It's bloody sharp!

BorkFactor

Original Poster:

7,278 posts

187 months

Monday 24th September 2012
quotequote all
Success! Disc retrieved, and the PS3 still acts the same as it did before I took it to bits so I don't think I ruined anything too major hehe



Getting that plastic cover back on correctly is a right PITA though.

Thanks for your help! thumbup