Memory Card problems
Author
Discussion

nelly111s

Original Poster:

116 posts

247 months

Sunday 22nd July 2007
quotequote all
Whilst in use a (genuine) Sandsik Extreme III 2GB SD card has "locked up". Won't read in a card reader on the PC, won't format in the camera (D80), so I can't use recovery software. Any ideas as to how I can get it recognised by the PC?

Thanks

Nelly

te51cle

2,342 posts

279 months

Sunday 22nd July 2007
quotequote all
Sandisk sells through a number of distributors in the UK who have the technical backup to sort out problems like this. Which retailer/e-tailer did you buy it from ? I'd suggest talking to them first, they probably won't be able to help but should at least be able to tell you who their distributor is, you should then be able to call the technical support department at the distributor for further help.

enderbylass

168 posts

232 months

Sunday 22nd July 2007
quotequote all
Just looked on the Sandisc website and there is a "self help" section that seems to have alot of questions similar to yours...maybe worth a read.

nelly111s

Original Poster:

116 posts

247 months

Sunday 22nd July 2007
quotequote all
te51cle said:
Sandisk sells through a number of distributors in the UK who have the technical backup to sort out problems like this. Which retailer/e-tailer did you buy it from ? I'd suggest talking to them first, they probably won't be able to help but should at least be able to tell you who their distributor is, you should then be able to call the technical support department at the distributor for further help.
Either Amazon or 7DayShop, not sure which. I've tried the website, but no obvious answers on there. I'll send an email to Support & see what they say.

Nelly