Mark on viewfinder
Discussion
I've spotted a small mark when looking through my viewfinder, just outside the ring of focus points. It's not the lense as it's in an identical position after I swapped lenses and it doesn't seem to make it's way onto the image itself (that I can see anyway). Is it likely to be in the viewfinder and can it be easily removed if it's just dust?
ETA- Canon 550D
ETA- Canon 550D
Take the lens off and look above the mirror where the incoming light is reflected upwards. There you will see a screen onto which the image is focused before the light is bounced around in the pentaprism and presented to you in the viewfinder. The mark is more than likely something on that 'screen'. If it is mirror side - which it probably is - it will likely shift using a hand operated airblower (carefully). If it's in the pentaprism (unlikely but possible) you will either have to have it serviced or just live with it. Most people live with such things unless they become really intrusive.
Don't use anything except an air blower (hand operated) without getting additional advice. It's not that things are difficult, just that it is best to have some prior knowledge of what to watch out for when messing around in the guts of a camera.
Don't use anything except an air blower (hand operated) without getting additional advice. It's not that things are difficult, just that it is best to have some prior knowledge of what to watch out for when messing around in the guts of a camera.
Gassing Station | Photography & Video | Top of Page | What's New | My Stuff


