Do Cimeara 16" wheels fit the back of an S3???
Do Cimeara 16" wheels fit the back of an S3???
Author
Discussion

techbotics

Original Poster:

1,805 posts

211 months

Monday 23rd May 2011
quotequote all
Hello

As title.. I have read on here that a) they do and b) they don't fit the back of a TVR S3.

I can see that they may fit a V8S as these have a wider track and hence more room between tyre and trailing arm, but will a 7.5 x 16 wheel with 225/50/16 tyres fit on my S3 with out using spacers etc...?

Thanks

Damian

Edited by techbotics on Monday 23 May 10:34

zombeh

695 posts

216 months

Monday 23rd May 2011
quotequote all
I don't think so.

S wheels are 7" wide and et25, chim rears are I think et35. The inside edge of a 7.5" et35 wheel will be about 16.4mm further in. When I discovered someone had previously fitted an S3 trailing arm to my V8 the wheel I was trying to put on there with 7mm (what I had in the garage) of spacers would have been 15.7mm further in (8" wheel, et30) and was still touching the trailing arm.

The sort of size spacer you'd need to make that clear (about 5mm I reckon) is probably a bit big for a shim and too small for a spacer.


Rower

1,381 posts

295 months

Monday 23rd May 2011
quotequote all
I have Chim wheels all round on my S3 , no spacers .

Rower

techbotics

Original Poster:

1,805 posts

211 months

Monday 23rd May 2011
quotequote all
Rower said:
I have Chim wheels all round on my S3 , no spacers .

Rower
hello please confirm 16x7.5 with 225 50 16 tyres ? If not what are you running on the back?

Also (sorry) do you know the offset on the back is it ET35?

Thanks Damian

Edited by techbotics on Monday 23 May 18:08

ttraynor

101 posts

187 months

Monday 23rd May 2011
quotequote all
I have chim wheels all round on my S2. They have an alloy spacer about 12mm and a slim steel spacer. fitted to each wheel.

Tom traynor

Last S4

504 posts

214 months

Monday 23rd May 2011
quotequote all
No spacers but its the S4/V8 chassis:

GreenV8S

31,017 posts

313 months

Monday 23rd May 2011
quotequote all
ttraynor said:
I have chim wheels all round on my S2. They have an alloy spacer about 12mm and a slim steel spacer. fitted to each wheel.

Tom traynor
What size though? It's common to use four Chim/Griff front wheels since they are the same size as the S series originals. It's when you try putting the bigger Chim/Griff rear wheels on that the potential problems start.

techbotics

Original Poster:

1,805 posts

211 months

Monday 23rd May 2011
quotequote all
I think I'll pass on these I don't really like the idea of spacers tbh

thanks D S3

ttraynor

101 posts

187 months

Tuesday 24th May 2011
quotequote all
I have 16s on the rear and 15s on the front.