New TVR film - but there's a problem...
Discussion
Hello 
What do you think of
http://www.youtube.com/watch?v=v9FYiGVWyZo

However, in particular the smoke coming from the car? I'm a little concerned...

What do you think of
http://www.youtube.com/watch?v=v9FYiGVWyZo

However, in particular the smoke coming from the car? I'm a little concerned...

Funnily enough I was passengering in a nice red S2 today, accompanying young Nick ('Kingfisher's' son) to the rolling road, in his newly re-built car.
I can confirm that it made a healthy 172.5 flywheel bhp, and from memory, around 180ft/lbs of torque.
Also she drives absolutely spot-on on the Gaz Golds, with comfy firm ride, and brakes fantastic with the discs all round.
I'm starting to seriously consider an 'S' now.
- Just hope my Wedge buddies don't read this.
.
This morning, with Griff 500 who was waiting his turn for the rollers:
.

Naturally a Wedger couldn't be seen in a TVR with roof on.
I can confirm that it made a healthy 172.5 flywheel bhp, and from memory, around 180ft/lbs of torque.
Also she drives absolutely spot-on on the Gaz Golds, with comfy firm ride, and brakes fantastic with the discs all round.

I'm starting to seriously consider an 'S' now.

- Just hope my Wedge buddies don't read this.

.
This morning, with Griff 500 who was waiting his turn for the rollers:
.
Naturally a Wedger couldn't be seen in a TVR with roof on.

Edited by grahamw48 on Friday 17th June 21:26
That's NO excuse !
Drop a cog...we need NOISE !
Like this:
http://www.youtube.com/watch?v=ZeQQwsgy8kg&fea...
Drop a cog...we need NOISE !

Like this:

http://www.youtube.com/watch?v=ZeQQwsgy8kg&fea...
Edited by grahamw48 on Friday 17th June 22:49
Luke, if its had a recent rebuild then is it something simple, oil must be getting into the combustion chamber from somewhere, so if the rings are good then it must be getting in from above, so valve stem seals?
if they were replaced then overfilled with oil? crankcase breather blocked or gunged up, maye worth checking the inside of the plenum for excessive oil residue, and the condition of the spark plugs, and oil level.
if they were replaced then overfilled with oil? crankcase breather blocked or gunged up, maye worth checking the inside of the plenum for excessive oil residue, and the condition of the spark plugs, and oil level.
Gassing Station | S Series | Top of Page | What's New | My Stuff



The smoke could be worn valve stem seals or overfilled with oil.
nice when viewed close up IMHO.

