FOC Bits to Go

[Alan Whitaker]

Hi All,
I have a few bits to go , They are FREE thats FREE to anybody needing them.

I X 7 1/2" diff 3:62 (ish) 100mm flange think it is very good
Pr drive shafts to fit above
1 X red powder coated fuel tank early type bolt on sender, no sender
4 X avo shocks with springs 2 X adjustable 2 X not , 1 adjuster needs replacing, told by Avo easy job

All are off a 1988 Jan S

Might have other bits as the rebuild starts. Can take to Newark if helps other than that its collect only

Alan

[Jaye R]

Alan

Is the diff LSD - he asks in vain hope?

Hope to see you at Newark tomorrow

Cheers
Jaye

[Alan Whitaker]

Hi, I don't think it is but I will look and see but me thinks they did not fit them to the 88 cars

I should have said I am in Leeds West Yorkshire.

Alan

PS Newark Tomorrow st I have it down as next week so I won't be going then

[Jaye R]

Alan

That's Ok - I live in Wakefield.

Just so happens I'm at the kit car show in Newark this weekend (as u mentioned Newark)

Cheers
Jaye

[phillpot]

Hi Alan,

Could I take those Avo's off your hands please?
Hopefully between them and mine i can get a decent set then pass on the "left overs" for anyone else to play with.

Mike.

[Alan Whitaker]

Hi Mike
There yours

Alan

[mikel003003]

Mike, might be interested in your left overs when your done, I need a rear pair!

[phillpot]

mikel003003 said:

Mike, might be interested in your left overs when your done, I need a rear pair!

Made a note in my "little black book"

I do things the old fashioned way

[Alan Whitaker]

Hi All
To add
1 Pr window glass none electric.


Alan

[Alan Whitaker]

Hi All
A rare find again FOC


From a 2.8 , 1988 ish
There could be a prop shaft but as of now may need
Alan

Edited by Alan Whitaker on Sunday 19th June 15:27

[ketvrin]

Hi Alan

Could you put my name against the pair of dribe shafts please?

K

[Alan Whitaker]

Hi All
The list


Norman Indecator back boxes
Donnysouthener glass and downpipes


Alan

Edited by Alan Whitaker on Sunday 19th June 16:56

Edited by Alan Whitaker on Thursday 23 June 17:33

[Donnysoutherner]

Hi can I put in for the glass and downpipes? I'm in Doncaster so run to Leeds is no problem, unless you are at SCH? Might wait to see what other stuff you might be chucking out!
Might be interested in the fuel tank but not sure if right for mine (bolt on sender?) Can you photo??

[ketvrin]

Great thanks Alan
I could collect most tues or wed nights as I work near Huddersfield most weeksm

Is there anything you are needing for your rebuild ?

Let me know what works best for you for collection

Cheers

K

[Alan Whitaker]

Hi
Tank is

I was going to machine a aluminium ring to bolt onto the flange and use a new bolt on type sender.

Alan

[Donnysoutherner]

Sender is different but might work, tank is certainly loads better than mine. Perhaps i can have a look when i pick up other bits?

[mikel003003]

phillpot said:

Made a note in my "little black book"

I do things the old fashioned way

thank you

[ketvrin]

Hi Alan
Just a brief thankyou for the driveshafts. It was nice to meet you
And I have to say I'm mighty impressed by your "project" WOW !

You will have to get to SCH2012 and show off your handiwork
You would win the prize for most radical customisation of an S (if there was such a prize)

Good luck with finishing it.

K