Gear lever Surround

[ttraynor]

Hi,

Some tome ago I seam to recall a member had fabricated an aluminum gear lever surround and showed some photo's of it? I was thinking of making one for my S2, can anyone point me in the direction of the thread or if others have done the same post some photo's|????

Thanks in anticipation.

Tom

[Longers]

Try emailing Steve J - he has one on his S

[steve j]

Working away from home at the moment but I`ll give you details when I`m home

[ttraynor]

Steve, Thanks for the reply. No problem let me have the info when you can.....Tom

[magpies]

Hi Steve -could you send me the same info
ta

[TVR-Stu]

Hi, I to would love to see a picture of it, may be a post on here would be easier than sending out info to individuals?

Thanks, Stu

[steve j]

A piccy is here. http://www.pistonheads.com/gassing/topic.asp?h=0&a...

[steve j]

The overall dimensions are 15 x 18 cms, then cut out the centre to suit the gear change cut out on the console. Once the hole in the alloy has been cut out, it leaves a surround of 1cm, this is attached at the corners with 4 countersunk bolts through the console, holes do need to be drilled in the console, so once it`s on, there`s no going back. The edges are filed to form a nice bevel then all polished up