Rear light multi-plugs
Discussion
Not the best quality connectors in the world plus I think if you do get them "wrong", which is easy coz there is very little slack in the loom on my car, the pins on the bulb holders instead of going between the metal bits in the plugs sort of go above or below and once the plug is deformed they are difficult to rectify.....
So this is my solution, couple of quid from Ebay (in fact so cheap I bought spare set in case I messed up fitting any of the connectors)
![](http://thumbsnap.com/sc/5RR4jtci.jpg)
Cut some short lengths of correct colour wire from a scrap loom, soldered to bulb holder and jobs a good 'un
![](http://thumbsnap.com/sc/gnSK20H0.jpg)
So this is my solution, couple of quid from Ebay (in fact so cheap I bought spare set in case I messed up fitting any of the connectors)
![](http://thumbsnap.com/sc/5RR4jtci.jpg)
Cut some short lengths of correct colour wire from a scrap loom, soldered to bulb holder and jobs a good 'un
![](http://thumbsnap.com/sc/gnSK20H0.jpg)
Gassing Station | S Series | Top of Page | What's New | My Stuff