fitting 24v - how do I mount the alternator

[magpies]

as title realy

although I have seen the odd photo showing the alternator high up on the drivers side I have not seen the mounting/adjusting arrangement

can someone shed some light please???????

[v8s4me]

Good to see you are back on the project

[sarbec]

dont know if this helps i mounted mine low on my race car you can just about make it out

[sarbec]

By the way the alternators from a rover 75

[magpies]

sorry but cannot see it!!

[sarbec]

i will take a better photo tomorrow

[Boosted LS1]

Are you up and running Ivor?

[Alan Whitaker]

Hi Mick
Its down on the left side. .


Might be tight to fit here with the rails so tight.

Alan

[Geoff38]

fitted like this in My taimar project ( done by previous owner with a chunk of box section steel....)

[sarbec]

Boosted LS1 said:

Are you up and running Ivor?

Hi Mike its with Jools at the moment need better injectors so were at a standstill at the mo have you any ?

[techbotics]

Doesn't boost performance do a kit?

cheers D S3

[Boosted LS1]

sarbec said:

Hi Mike its with Jools at the moment need better injectors so were at a standstill at the mo have you any ?

Sorry Ivor but I don't. You could put a post on Fordpower in the 24v section. There are some 400 hp projects on the go. Look for Ade 500, I built his engine and he's doing final mapping at Emerald shortly. Or, you could buy from here:

http://www.rceng.com/

They'll have something good and I've bought from them before.

[Boosted LS1]

techbotics said:

Doesn't boost performance do a kit?

cheers D S3

I used to but they became expensive and time consuming to produce.