Does anyone know where I can get....

[kentishS2]

A pair of stainless pipes ....I just need them bent to shape to replace my front silencer on the V6S?

Somewhere in Kent would be handy!

[ukbob]

Im sure you know this, and its probably not helpful, but Austec is not too far from you, and for the V8 they go to ACT who custom make the pipes... they might also do V6 pipes bent the way you need them (I dont know) but you could always call to find out, or does that not help?

[WildfireS3]

Front silencers? Do you mean the big oval pipe? Or the Down pipes?

[kentishS2]

WildfireS3 said:

Front silencers? Do you mean the big oval pipe? Or the Down pipes?

The big oval which is apparently packed as a silencer albeit somewhat small for a silencer!

There are some photos on this old thread:-

www.pistonheads.com/gassing/topic.asp?t=118661&f=11&h=0&hw=exhaust

So, what I'd like to do is replace this front oval silencer section with just a pair of straight pipes sweeping upwards a little to fit into a new pair of cherry bomb style rear silencer that replace the current rear box section rear silencer.

In theory, it shouldn't cost that much to do.

[WildfireS3]

Oh right. Sorry no. The JP system I got from ACT has this, into an oval box.

[kentishS2]

What I basically want to do is go from the standard downpipes with two new pipes sweeping under the car and then into two new silencers that I can locate slightly higher into the chassis.

[pies]

try www.demon-tweeks.co.uk

[kentishS2]

pies said:

try www.demon-tweeks.co.uk

Cheers Pies, they do a good range.
I'll have to go measure my tubes!