clicking noise on the back when turningleft
Discussion
Sounds like the CV joints at either end of the driveshaft. Try gripping the driveshaft in one hand and the joint in the other, and twisting them to feel for any play. Make sure that any play you do feel is in the joint, and not backlash in the diff or something - try to keep the joint still while you twist the shaft. Do that at each end of the drive shaft.
Joints are easy to buy (standard Sierra) and relatively easy to change - the hardest bit can be shifting the 6 torx or allen screws that hold the driveshaft at each end, to the axle and the diff.
Joints are easy to buy (standard Sierra) and relatively easy to change - the hardest bit can be shifting the 6 torx or allen screws that hold the driveshaft at each end, to the axle and the diff.
Gassing Station | S Series | Top of Page | What's New | My Stuff


