Crabtree C50 MCB Switch?
Discussion
Hi Joe, my fuse board is "Square D", replacement MCB's are a ridiculous price so got a couple off Ebay.
There are lots of guys selling on there, probably either got "left overs" from jobs or second hand ones from boards they've replaced.
30A
putting a ring main in the garage ? Edited by phillpot on Wednesday 1st January 14:30
v8s4me said:
Worst I've come across so far is £28 for "as new". Best is around £7.00 but difficult to know whether it would be better than the one I have which keeps tripping out. A bit like Glen on Ovomotine 


I've had a rummage through my bits ( ooh-err missus ! ) to no avail I'm afraid Joe. My spate MCB's are MEM or Wylex, & I don't have those in 30a ( or the more common 32a ).
Hopefully some bright spark
will come up with one.Take care & don't forget your rubber boots & marigolds


v8s4me said:
There's no earth leak on the circuit but if I wiggle the little switch on the CB the whole board goes down. I think I might know what screwed up the existing one (
) but I'll save that tale for the Euro Trip. Talking of which.................................
Sounds like you have a loose buzz bar
) but I'll save that tale for the Euro Trip. Talking of which.................................Put a pick up of your mcb there's 3 types and I have some
phillpot said:
With the age of that board I think I'd be putting my tenner towards something like this.
(no offence to Mr Jackson).
Maybe offer yours to the Science Museum
Mr faraday put that in
(no offence to Mr Jackson).Maybe offer yours to the Science Museum

But yes you whant to be looking at replacing it with something
From this century
It may save your life as a plus point with some rcds
Gassing Station | S Series | Top of Page | What's New | My Stuff



