S2 wiring loom improved
Discussion
Just incase any one else has ever wondered if there is enough slack on the front wiring loom of an S2 to move it up from its present position to above the coil,...there is.
My old loom was in a mess having been trapped down in the inaccesible valley between the offside rocker box cover and the plenium where is cooks resting on both and is soon open to defects as a result.
So,the other weekend I took off the coil,changed over to a replacement loom from a breakers which I had taken apart,cleaned,inspected and re-taped,and then relocated running along the top of the coil where it keeps much cooler and is at least positioned for better maintenance. Covered it with some flexible plastic split tubing and it even now looks much better than before.
OK...
I will go and get a life!
For everyone who has never wondered...and thinks they have a life...why are you reading this?
My old loom was in a mess having been trapped down in the inaccesible valley between the offside rocker box cover and the plenium where is cooks resting on both and is soon open to defects as a result.
So,the other weekend I took off the coil,changed over to a replacement loom from a breakers which I had taken apart,cleaned,inspected and re-taped,and then relocated running along the top of the coil where it keeps much cooler and is at least positioned for better maintenance. Covered it with some flexible plastic split tubing and it even now looks much better than before.
OK...
I will go and get a life!
For everyone who has never wondered...and thinks they have a life...why are you reading this?
Gassing Station | S Series | Top of Page | What's New | My Stuff