Last Few Bits to Make
Discussion
Hi All
Just been down doing the last few jobs before it all comes down for paint, Most of the work now is making things fit in the space I have left under the bonnet.
Could not find a expansion tank that would fit in the space I had so it's back to making it myself, bits cost about £10 from ebay,just needs to be welded.
Just Made the 2 into 1 air manifold for the Turbo's, it needs a good clean and polish on the inside.
Had a swirl pot but too long so cut it down and put a elbow on the outlet now it fits.
Going to weld the header tank up this afternoon.
Alan
Just been down doing the last few jobs before it all comes down for paint, Most of the work now is making things fit in the space I have left under the bonnet.
Could not find a expansion tank that would fit in the space I had so it's back to making it myself, bits cost about £10 from ebay,just needs to be welded.
Just Made the 2 into 1 air manifold for the Turbo's, it needs a good clean and polish on the inside.
Had a swirl pot but too long so cut it down and put a elbow on the outlet now it fits.
Going to weld the header tank up this afternoon.
Alan
jwigglesworth said:
Verrrrrrry smart work. Straight out of the old Grolsch advert- Vakmanschap is meesterschap. (No doubt Han will provide a translation if so required; my dutch atrophied so not going to risk the emabarrassment by doing it myself)
Grolsch : fine beers ! Should translate in something like : Craftmanship equals mastership.Really applies to Alan ! Excellent work again !
Han
Gassing Station | S Series | Top of Page | What's New | My Stuff