V8S Wiring Diagram

[v8s4me]

Does anyone have a full size (one piece) wiring diagram like the one which is spread over pages 310 & 311 of the 2nd edition of the SH book? Ideally I'm looking for a very clear print so I can have it enlarged to A1 so I can have half a chance of being able to read it Thanks in advance.

[phillpot]

If only they listed TVR ..... clicky

[v8s4me]

I contacted them and they said, "Sorry nothing that new"

[jwigglesworth]

Isn't there one in the back of the factory handbook? If so couldn't you have this enlarged to A3 on a good photocopier?

[v8s4me]

jwigglesworth said:

Isn't there one in the back of the factory handbook?

Has anyone got one to confirm?

[phillpot]

there are wiring diagrams with my S3 Handbook, approx A4 when folded out?

Same ones as reproduced in Steve Heaths book i.e. early car with 2.8 engine and a supplement for the 2.9 engine

[v8s4me]

The V8S diagram reproduced over two pages in the SH book is probably a reproduction of the factory diagram as well them. But the problem is, the quality of the one in the SH book isn't good enough to enlarge to the size I need. My local print shop will probably want a .pdf so the original I make the .pdf from needs to be pin sharp so it stays legible when it's enlarged.

[phillpot]

Best get the pencils and ruler out then

[v8s4me]

The evenings are going to have to be a lot longer and darker for that to happen

[zombeh]

I don't think there is one, at least I've never seen one.

In the owners information folder that came with my car is the diagram for an S1 and the engine loom diagram for a 2.9. There's a wedge diagram and a chim one I think in the back of the Steve Heath book

I think you're supposed to look at the car, compare it to the diagrams you have and then work it out for yourself where it's different.

[Barkychoc]

Why not try the PDF option? PDF files resize well due the way they vector the graphics - it doesn't fall apart like a bitmap. I'll see if I can have a go shortly.

[Barkychoc]

I've scanned as a PDF (These are then photos of the screen)

100%



Here is 800% taking it to A1



As you say the image is poor but it doesn't get worse blown up as a PDF

[v8s4me]

Thanks Chris - YHM

[zombeh]

A wiring diagram for a V8 would look a lot like the 2.8 http://tvrsseries.com/drawings/GeneralElecs290S.jp...

Except that all the bit in the bottom left where it says engine loom should look like a hotwire rangerover (nice picture here http://forums.lr4x4.com/index.php?showtopic=67455 )

1. 12 (main cable connector) in the rover diagram is the engine loom/vehicle loom connector in the TVR diagram

[phillpot]

zombeh said:

Except that all the bit in the bottom left.....

.... and the lack of electric window motors, electric mirror adjust. Two of the "problematic" areas that crop up fairly regularly on the Forum

[v8s4me]

phillpot said:

... Two of the "problematic" areas that crop up fairly regularly on the Forum

So where is the pressure cap on this diagram then?