Fuel filler hose

[ChrisGadd]

Any one got an idea where I can source some of the rubber fuel filler hose that sits between the filler cap and solid pipe and fuel tank to solid pipe. It looks like it's 70mm external diameter and 58mm internal but I may be wrong.
Mine has split so thought I would replace while I'm plumbing in my new tank

Thanks in advance

[phillpot]

57mm (Two and a quarter inch) ID


Car Builder Solutions


this looks more like original, Demon Tweeks

[ChrisGadd]

phillpot said:

57mm (Two and a quarter inch) ID


Car Builder Solutions


this looks more like original, Demon Tweeks

Thanks Mike the Demon Tweeks item looks right to me too. I don't suppose you know the size of the three Banjo bolts for the fuel line to pump and filter are?

[phillpot]

ChrisGadd said:

don't suppose you know the size of the three Banjo bolts for the fuel line to pump and filter are?

This is my spare pump, no separate banjo bolt (they may not all be like this?)





Don't know the filter bolt sizes off hand but do seem to recall they are different each end?

[phillpot]

Back again, just jacked the car up, removed filter and checked (didn't take as long as I thought it would ) and reckon you should have M12 and M14 both by 1.5 pitch.








ETA. look what I found ...... clicky

Edited by phillpot on Tuesday 15th December 21:14

[ChrisGadd]

Thanks again Mike, as always you seem to have the answers

[ChrisGadd]

Next question for the knowledgeable S gurus ... should I replace the push fit plastic fuel line between the fuel pump and filter that fits onto the banjo's or should I use something better? and what internal diameter should it be?