Windows S1 1988

[Tvrs19882004]

Hi

As promised new thread to ask for advice on the perishable on the windows of my S1 1988
The picture should show I have no rubber etc between the windows and the the glass on both passenger and drivers side.

So what am I missing and where do I get it from.





Thank you

[Tvrs19882004]

[Tvrs19882004]

[Steve_D]

Here you go.
http://www.racetechdirect.co.uk/car-parts/body-tri...

Steve

[Tvrs19882004]

The channel rubber, thanks is there supposed to be a finisher at the end of the channel? The glass is beginning to chip where it touches the aluminium.

Also the vertical part that is parallel to the glass does that have a covering?

Ta

S

[phillpot]

Tvrs19882004 said:

is there supposed to be a finisher at the end of the channel?

No, channel strip bends round the corner and cut off flush at end of alluminium channel.

TVR were not "big" on bespoke trim mouldings, only having parts made where they really had to, other end of door to guide the glass for example

Tvrs19882004 said:

Also the vertical part that is parallel to the glass does that have a covering?

Yes, as in your first photo.

[Tvrs19882004]

Thanks I do not have the plastic end bit you gave as an example either. So need to find that bit and the protection for the upright.
Thanks

[phillpot]

Tvrs19882004 said:

need to find that bit

that bit

[Tvrs19882004]

"other end of door to guide the glass."

As well as the other bits.