Lambda Sensor Connection Plug

[yknot]

Hello chaps, I am after a replacement connector for my O2 sensor that has been fried on the exhaust at some point in its past!!

At the moment I can bodge a connection with what's left but would be ideal to replace the socket.

The part I'm after is the 3 wire loom side connector and if anyone has a spare loom with a Lambda socket they are willing to part with, then please let me know, or alternatively, can someone point me in the direction of a new one??

Ta, P

[GreenV8S]

What does the old one look like? I'm wondering whether it's similar to the V8S, which I don't remember a source for, but might be able to find.

[mk1fan]

Why not fit a waterproof three way connector? Readily available of evilbay. Probably a better connection than the original too.

[yknot]

Thanks Peter, but I doubt it is the same as the RV8 O2 sensor connection. I can't find a picture online but this appears to be the Bosch sensor showing the end connector (that is ok on mine) which fits into the female connector on the loom side, which is the broken bit I'm after. Hope that make sense????

https://www.onlinecarparts.co.uk/bosch-1148591.htm...

[yknot]

mk1fan said:

Why not fit a waterproof three way connector? Readily available of evilbay. Probably a better connection than the original too.

That's the other option!

[GreenV8S]

It's not the same. You might try searching places like Mouser - a quick skim through their three pin automotive connectors brought up a few dozen triangular connectors but I have no idea whether any of them will turn out to match. TBH, putting a new connector on both sides is going to be the easiest solution.