Speed Sensor on S3 Gear box
Discussion
Hopefully a quick one for the experts. Does anyone have any photos of where the speed sensor is on a '91 S3 so I can change it? (and where it earths down to - it is not the nr side engine earth or the offside earth to the diagonal in the engine bay wheel arches as these are bright now).
Finally, can you get to it without taking out the engine out or body off?
Thanks
Mark
Finally, can you get to it without taking out the engine out or body off?
Thanks
Mark
It is over reading as the draw on current increases with load. If I can track the earth and clean connections then might improve. It has only degraded in past 12 mths I think as was spot on after body off chassis attack. Worst case I'll look to add a supplemental earth.
Looking down from the gear gator, I have connections. From previous reply I guess the one I am after is the connector block one not the 2-pin black plug (reverse sensor?)
Looking down from the gear gator, I have connections. From previous reply I guess the one I am after is the connector block one not the 2-pin black plug (reverse sensor?)
Edited by White S3 on Wednesday 12th September 19:45
Gassing Station | S Series | Top of Page | What's New | My Stuff



