V8S will not idle and cuts out
V8S will not idle and cuts out
Author
Discussion

morph2006

Original Poster:

57 posts

248 months

Saturday 4th March 2006
quotequote all
The problem is ...

Rough idle, engine shakes when cold and warm and then cuts out, also will not rev somtimes.

Was running fine the other day!!!

I thought it maybe the stepper motor which was black when I removed it to be cleaned, but still no joy. After I cleaned it I got smoke from in front of the radiator - from I think the air filter ??? Smoke stopped and on restarting not smoke but still rough idle, cuts out and does not rev smoothly.

HELP please

GreenV8S

31,017 posts

313 months

Saturday 4th March 2006
quotequote all
Something wrong. Sorry, not very helpful but those symptoms aren't enough to nail it down, there are loads of fuel/ignition faults that could cause those symptoms. Is it coming due for a service? If so, bring it forward a bit and get your TVR specialists to fix this while they have it - it may be that servicing will fix the problem anyway.

morph2006

Original Poster:

57 posts

248 months

Saturday 4th March 2006
quotequote all
Hi

Not due for service but I think it can go in anyway, giving up on this one, it will make it the 2 miles down the road so in it goes.

morph2006

Original Poster:

57 posts

248 months

Saturday 4th March 2006
quotequote all
Not quite given up, cleaned the stepper motor was very dirty, and could do with a new washer. Also cleaned the throttle control inside the air intake (all black as well).

Too late to try starting because of noise so will see if we have a runner in the morning.

One thing - in the bible it shows a bleed screw, but mine is sealed off no whole let alone screw also which pipe is the air bypass ( the pipe the bible says to ristrict when setting the bleed screw ) ???

GreenV8S

31,017 posts

313 months

Saturday 4th March 2006
quotequote all
The bleed screw is fitted with an anti-tamper cover. The bypass hose is the hose which goes from the throttle body to the input on the stepper motor housing.

morph2006

Original Poster:

57 posts

248 months

Sunday 5th March 2006
quotequote all
Yes! She idles very smooth now, not had chance to take out but looking good. - Took a little starting. - I think there must have been about tens years of dirt in there which has now been cleaned by me or blown out the engine when it started!

Thanks you for help.

morph2006

Original Poster:

57 posts

248 months

Sunday 5th March 2006
quotequote all
Short lived - back to rough idel cold or warm.