Hands of a very thin long armed child
Discussion
I had the smae problem until i realise you can access the adjuster by removing the tape holder box insert in the central arm rest by unscrewing the two screws at the back. lift up the arm rest / dash and you can prise out the tape box and there is the adjuster almost cms away! Whether turning it will make any difference tho is another matter...
jake
jake
If you are correct Jake (will try it out over the weekend) then this must be a top tip for anyone wanting to adjust their handbrake cable. It always amazes me how much knowledge is available on this forum.
Should have done a search on this forum it's already been mentioned in a previous thread. Although there is a question if this access is still available on an S3. Does anyone have experience of this and can you tell me where exactly the retaining screws are for the aforementioned console.
Should have done a search on this forum it's already been mentioned in a previous thread. Although there is a question if this access is still available on an S3. Does anyone have experience of this and can you tell me where exactly the retaining screws are for the aforementioned console.
Edited by ChrisGadd on Tuesday 6th June 11:37
Gassing Station | S Series | Top of Page | What's New | My Stuff





