HELP ! Diff Needed !
Discussion
kostas said:
Probably not but your propshaft flange will be the same as on an lsd, there are 2 types a 7 or 7.5 inch flange diameter, if your diff is a 7 inch then i would be looking for a 7 inch lsd, problem is i cant have a look at mine because its on the car.
Re 7.5 inch vs 7 inch diffs. I think the Bible is a little confusing on this - it refers to diff flages, but none of them are actually more than about 4 inches diameter. I believe the 7/7.5 dimension refers to the width across the top of the diff casing between the top mounting bolts. My S1.5 definitely has a 7.5 inch diff.
Apparently the other way to tell is that the 7 inch unit has a single long bolt going through the top mount while the 7.5 inch ones have two separate bolts
allan-m said:
Hi Pistolar !
Thank you for your kind offer,i know beggars cant be choosers however can you tell me if it is a 3.64 ratio and what are we reffering to as 7 or 7.5 inch,and lastly is it good.
Thank you i eagerly await your reply.
Thank you for your kind offer,i know beggars cant be choosers however can you tell me if it is a 3.64 ratio and what are we reffering to as 7 or 7.5 inch,and lastly is it good.
Thank you i eagerly await your reply.
the S was low mileage, so should be OK. Dont know ratio, standard S i presume
Gassing Station | S Series | Top of Page | What's New | My Stuff



