Anyone got Pioneer DEH-P77MP ?
Anyone got Pioneer DEH-P77MP ?
Author
Discussion

V8S

Original Poster:

8,582 posts

266 months

Wednesday 11th April 2007
quotequote all


Has anyone got this stereo? I'm looking to remove it from its cage to check connections (it's gone dead) but it's not budging and I can't work out how it comes out.

The previous owner of the car can't remember how it was fitted and any fitting keys it may have had have been misplaced.

Thanks.

gentleman geoff

1,058 posts

241 months

Wednesday 11th April 2007
quotequote all
You can buy fitting/removal keys for just about all makes of ICE systems from Halfords. I'm not an expert, but I'm pretty sure that you just slot 'em either side of the unit and gently pull back...

page3

5,193 posts

280 months

Wednesday 11th April 2007
quotequote all
You need the pioneer extraction tool, which is two bent bits of flat metal - which Halfords will sell you for a load of cash.

Nice stereo though

bhgi

37 posts

259 months

Friday 13th April 2007
quotequote all
just checked and I have the exactly the same in my V8S! I also have the boxit came in and all the installation instructions etc. If you still need this info let me know and I can photocopy it and send it.
Giles

900T-R

20,406 posts

286 months

Friday 13th April 2007
quotequote all
Hm, I've got one exactly like that but mine doesn't ever show "PARTY" on its display. Harumph. irked

V8S

Original Poster:

8,582 posts

266 months

Friday 13th April 2007
quotequote all
bhgi said:
just checked and I have the exactly the same in my V8S! I also have the boxit came in and all the installation instructions etc. If you still need this info let me know and I can photocopy it and send it.
Giles


Hi,

I downloaded and printed the manual off the web a couple of years ago. I think I need a set of those extraction keys but the Bristol Cribbs Halfords didn't have them. I'll try my local one soon.

Thanks for the offer though thumbup

Podie

46,649 posts

304 months

Friday 13th April 2007
quotequote all
Cracking bit of kit

Think you've got the answers you need though...

loudandfast

213 posts

313 months

Saturday 14th April 2007
quotequote all
pioneer radio keys are only flat strips of metal nothing special. they are about 6mm wide so anything flat will do even jigsaw blades.remove the trim surround and push your stips down the sides about half way up and this will push the locks out and then pull the radio forward.
PARTY is an e.q setting on the head unit others POP.VOCAL and other are pre programed.

doddze

1,302 posts

268 months

Sunday 15th April 2007
quotequote all
or just take out the centre console which is two screws and get at it from the other side

Tripps

5,814 posts

301 months

Monday 16th April 2007
quotequote all
Podie said:
Cracking bit of kit
cloud9 If only they still made it, or there was something similar, I couldn't bear a whizzy/flashy stereo in the S and have away my old one with the S3