Side window removal

[Russ35]

How are the side windows held in place?

I've had a look and it appears to be 2 metal plates that clamp it in place at the bottom with 1 or possibly 2 nuts to undo. Is this correct?

I plan on realigning the drivers side as I'm sure its angled forward a bit (leaves a gap at the front top corner) and replacing the felt in the runners.

[merky300]

Hi

This isn,t the best photo however it's the only one I have. The plate arrowed has two bolts if you loosen them you can adjust the window or remove them and the window will come out. The rear half length window channel is held in place by two bolts through the bottom of the door and one screw above the door lock. The front full length channel is held in place by four screws through the triangular plate at the top/front of the door one bolt through the support bar and is held at the bottom by a nut attached to the bottom door hinge. The window will come out by just removing the half length channel.

window<a href="http://s256.photobucket.com/albums/hh192/merky300/?action=view&current=PICT0008a.jpg" target="_blank"><img src="http://i256.photobucket.com/albums/hh192/merky300/PICT0008a.jpg" border="0" alt="Photobucket"></a>

[merky300]

Think I pressed the wrong link.

[Russ35]

Thanks for the confirmation. It was as I thought although I hadn't located the attachment on the bottom door hinge.