Wobbly driver's door.. gear lever gaiter.

[S3Paulo]

I wonder if any one can help me.... my door has dropped and is loose on it's lower hinge/pivot.. is this fairly straight forward to rectify.. is there a captured nut/bolt in the fibreglass that i need to undo with great care..? Any help would be mightily appreciated.

Also.. the gear lever gaiter.. what is it off.. and where can I get a new one..

Thanks in advance chaps..

Paul.

[Barkychoc]

Gear lever gaiters are made for the TVR but they are on ebay.

http://cgi.ebay.co.uk/TVR-S1-S2-S3-OR-S4-GEAR-HAND...

It says they do other colours.

I don't know enough about the door hinge mechanism to help.

Chris

[Ray S]

Hi S3P door hinge nut is trapped in body fibreglass top & bottom ,bolt is 8mm & will be worn,the nuts on mine were either brass or some type of bronze ,oil well before trying to undo.Obviously door panel has to come off go to useful tips for this,best to remove door ,bit of a fiddly job but managed to do mine on my own.Good luck.Ray s;)

Edited by Ray S on Friday 6th June 06:56

[S3Paulo]

Thanks guys... I will give it some looking at this weekend.

Paul

[Longers]

I've previously used that ebay link Chris posted for a matching gearstick and handbrake gaiters. Good product & service