steering bush

[EdT]

Sorry if this has been covered a hundred times...
Just had a poke around the car with my mechanic, mentioned the steering is lose & knocks. He spotted the Ford marked bush was pretty knackered - it's where the column enters through the bulkhead. Are these bushes still available?
thanks guys
Edt

[Barkychoc]

http://www.tvrcarparts.com/pages/partdetail.asp?id...

[ketvrin]

And not forgetting the useful "How To..." on Pies site...

http://www.tvrsseries.com/

K

[mep12345]

Bought mine today TVR car parts have them on the shelf at £16.00 + Vat for the full kit. Would suggest you do the lot not just the inner bush

Mark

Edited by mep12345 on Wednesday 11th March 22:22

[drivingfroggy]

When I went to fit mine, I found out that even using the "duct tape the spanner on the nut" technique, this is a two man job. Therefore mine hasn't been changed yet.

[EdT]

chaps, thanks

[tozerman]

Ed, it can be done on your own but it is really fiddly (Iknow I've done it) even if you get your missus to hold a spanner on the nut under the bonett it will save you about 30 minutes of d*cking about, good luck
Cheers.....Tony..