Source of fuel injector hoses

[mikea4tdi]

I managed to reconnect alot of my engine over the weekend but unfortunately as the pipes are brittle I managed to break the cold start injector line, the originals seems fairly rigid and formed with the correct bends etc.
Has anyone had to source one or have one made up before, they have the standard banjo end fitting on, I assuming if an orignal can't be had then a more flexible hose witht the right end fitting could be made up.

Any tips welcomed.

[Barkychoc]

Could be worth trying a place that does hydraulic hoses - just make sure the hose they use is petrol resistant.

Edited by Barkychoc on Monday 30th March 13:01

[Mr Sheen]

I replaced my fuel lines with Gates 3225 hose which I bought off E-bay. I'm not sure if this is the same hose you are after?