Removing front indicators
Removing front indicators
Author
Discussion

Russ35

Original Poster:

2,706 posts

268 months

Sunday 1st November 2009
quotequote all
Probably already been covered in the past, but just for a change the search option isn't working mad

I'm going to replace the indicators lenses with the Kia ones, but how do you separate the lens from the bulb holder part. I'm trying it an old complete unit I have and cannot work it out, and trying to force it would risk breaking the lens.

Russ

johnnywgk

2,579 posts

211 months

Sunday 1st November 2009
quotequote all
If the orange lens is broke the just pry it off with a blunt screwdriver type tool.

If you want to keep the orange part, (if it's in good condition) DONT DO IT....

It will more than likely break. The black part is tougher than the RARE orange
part HTH

johnnywgk

2,579 posts

211 months

Sunday 1st November 2009
quotequote all
If the orange lens is broke the just pry it off with a blunt screwdriver type tool.

If you want to keep the orange part, (if it's in good condition) DONT DO IT....

It will more than likely break. The black part is tougher than the RARE orange
part HTH

tvrgit

8,489 posts

281 months

Sunday 1st November 2009
quotequote all
Johnny's right - I used an old butter knife (well maybe it was a fish knife, I dunno, I've only just learned not to eat with my fingers) and prised the two bits apart.

Fortunately, you have to remember, these were assembled by British Leyland in their heyday, so they tend to join where they touch anyway, using the bare minimum of glue, so it doesn't take much to get them apart.