Discussion
Having taken the front end of the car apart completely now some of the parts are looking a bit too tatty to put back on. My front hubs currently look like this:
I found a pair of Sierra front hubs at this website (bottom of the page)
www.kitpartsdirect.com/page7.htm
Is £90 a pair about right? Or could I get the ones I already have refurbished?
I found a pair of Sierra front hubs at this website (bottom of the page)
www.kitpartsdirect.com/page7.htm
Is £90 a pair about right? Or could I get the ones I already have refurbished?
Hi Tom
You need to be aware the conical bits fitted to the S front suspension is a TVR special and they need to be fitted and tack welded in place. (I found this to my cost when it took mine out and had to have they re-fitted by Adrian Venn)
I suspect that sending yours to be shot blasted and powder coated plus new dust covers and bearings will be much less tha £90.
Nice shiny new dust covers were avaialble from my local ford dealer last year Part number 6142524 £3.33 each, Bearings available via your local motor factor as cheap as chips.
Norman
You need to be aware the conical bits fitted to the S front suspension is a TVR special and they need to be fitted and tack welded in place. (I found this to my cost when it took mine out and had to have they re-fitted by Adrian Venn)
I suspect that sending yours to be shot blasted and powder coated plus new dust covers and bearings will be much less tha £90.
Nice shiny new dust covers were avaialble from my local ford dealer last year Part number 6142524 £3.33 each, Bearings available via your local motor factor as cheap as chips.
Norman
Gassing Station | S Series | Top of Page | What's New | My Stuff