is it poss to make cable clutch?
Discussion
My guess is that the cars were made hydraulic as either there isn't enough room for the clutch fork sticking out or more likely you can't route the clutch cable without it fouling the exhaust.
You might be able to do it if you had a very long clutch cable made that goes forwards to the front of the car to clear the exhaust manifolds, then sweeps back under the manifolds.
The other problem then is the pedal - you need to be able to pull the cable and the current pedal arrangement pushes.
Try a post on a few kit car forums to see if you can find if anyone has done a hydraulically operated MT75 got to be easier option surely?
You might be able to do it if you had a very long clutch cable made that goes forwards to the front of the car to clear the exhaust manifolds, then sweeps back under the manifolds.
The other problem then is the pedal - you need to be able to pull the cable and the current pedal arrangement pushes.
Try a post on a few kit car forums to see if you can find if anyone has done a hydraulically operated MT75 got to be easier option surely?
Gassing Station | S Series | Top of Page | What's New | My Stuff