helppppppppppppppppppppppppppppp
Discussion
The V8S colors are not the same as on my S3. My mirrors are working again, but the only problem is up/down is working in reversed order.
Left/rigt is OK. Tried lots of combinations but couldn't get it right.
Left/right switch (connections are numbered) :
1. Black/white with insulation
2. Black/white without insulation
3. Black/yellow with insulation
4. Brown
5. Black/yellow without insulation
6. White
Joystick (looking to the rear with the green sticker on top)
Left : Green
Right : Black
Top left : orange
Top right : red
Bottom left : blue
Bottom right : grey
Happy if anyone could check what I should change !
Han
Left/rigt is OK. Tried lots of combinations but couldn't get it right.
Left/right switch (connections are numbered) :
1. Black/white with insulation
2. Black/white without insulation
3. Black/yellow with insulation
4. Brown
5. Black/yellow without insulation
6. White
Joystick (looking to the rear with the green sticker on top)
Left : Green
Right : Black
Top left : orange
Top right : red
Bottom left : blue
Bottom right : grey
Happy if anyone could check what I should change !
Han
Gassing Station | S Series | Top of Page | What's New | My Stuff


