bottom front balljoint

[FARKIT]

Does anyone know what the bottom ball joint is from? It isn't Sierra, as they don't have detachable units...

[zombeh]

The parts list says it's "QSJ765s or AP Lockheed TC76 both of which are for Fiat's models 124/125/132"

[Gerald-TVR]

Hi Bruce have you tried the search engine - lots of info out there

[ketvrin]

Also a bit misleading but this (FAQ) post discusses the TOP ball joint but near the bottom of page 2 includes details of the bottom ball joints including some diagrams of bolt hole centres which need to be checked out

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

K

[FARKIT]

Thanks Guys - just ordered one from the local motor factors, along with the Saab top - hopefully both will fit.....if only everything in life was as simple as a TVR...........

[barefootoo]

I think its from a Lada!" If you ring SQS auto parts they stock this part, cheap as chips Tel no 01206 308147, ask for David or Richard. They are realy helpfull
Ray

[Barkychoc]

The Lada is an old fiat design isn't it?

[zombeh]

yes, it's a fiat 124 (the parts list however said something about lada ones not fitting for some reason though, something important about the shape of the part for a TVR that isn't important on a lada)

Edited by zombeh on Tuesday 19th April 19:14

[FARKIT]

Thanks for all your help chaps - picked the parts up from the local motor factors this morning (bought 2 of each so I can do the other side if required) - all fitted like a glove this afternoon - slowly getting there.

The good news is that I now have steering again!!