Diagnostic port Help !!!

[tozerman]

Not wanting to steal Norman's thread but I appear to have 2 diagnostic ports, one black and one white, which is the correct one and what does the other one do ?



Cheers.....Tony..

Edited to add it is an S3c

[Gerald-TVR]

The diagnostics port I have seen was black but you can confirm which is the diagnostics connector by checking the colour of the wires, they should be brown, brown/green and blue/green

The other connector will be octane adjust and the wires should be blue/yellow, brown/red and brown/blue.

Usual disclaimer, I cant garantee accuracy etc use at your own peril.

Norman

[orange_dodo]

Gerald-TVR said:

Usual disclaimer, I cant garantee accuracy etc use at your own peril.

If you cut the wrong wire you can't blame Norman when it goes KABOOM

[steve j]

orange_dodo said:

If you cut the wrong wire you can't blame Norman when it goes KABOOM

Been there and done that,

[tozerman]

Thanks Norman,I'm fairly sure the black one has the colour wires you suggested, will check tonight.
Cheers.....Tony..