Powder coaters in w yorks?
Powder coaters in w yorks?
Author
Discussion

adamc987

Original Poster:

133 posts

187 months

Sunday 16th January 2011
quotequote all
Hi I'm looking to get my wheels powder coated on the Vx as they are looking a little bit tatty.anybody know/used a decent place?
roughly how much should I be looking at per wheel?


blackcab

1,259 posts

223 months

Sunday 16th January 2011
quotequote all
Go and see Alan at Castleford powder coatings - he has done loads of stuff for me - hes not he quickest but hes really good and very cheap

TVR Beaver

2,874 posts

203 months

Sunday 16th January 2011
quotequote all
CAS Powder Coating in Eccleshill Bradford.... Top job... Strip back, blast... re-powder all for £1 per inch!... other finishes available... but all they do are wheels... fantastic job

DannyVTS

7,543 posts

191 months

Sunday 16th January 2011
quotequote all
TVR Beaver said:
CAS Powder Coating in Eccleshill Bradford.... Top job... Strip back, blast... re-powder all for £1 per inch!... other finishes available... but all they do are wheels... fantastic job
That's a bargain.

I've heard theres a good place in Featherstone and Castleford

adamc987

Original Poster:

133 posts

187 months

Sunday 16th January 2011
quotequote all
TVR Beaver said:
CAS Powder Coating in Eccleshill Bradford.... Top job... Strip back, blast... re-powder all for £1 per inch!... other finishes available... but all they do are wheels... fantastic job
I had been told about one in eccleshill so this must be the one they were on about.I shall have a drive across tommorow and to the one in castleford.

Thanks adam

snotrag

15,497 posts

234 months

Sunday 16th January 2011
quotequote all
The fella i'n castleford is good, bit backstreet but does a good job, done various odds and sods for me, bike frames, car bits etc.

Jez64

2,158 posts

208 months

Sunday 16th January 2011
quotequote all
Is NB Coatings still going in Pontefract?

Not used them for a while, but did a top job on a bike frame of mine.

Winstar

110 posts

245 months

Monday 17th January 2011
quotequote all
I used http://www.crimblepowdercoating.co.uk/ in Slaithwaite for the wishbones on my VX a couple of years ago good service and finish

Defcon5

6,459 posts

214 months

Tuesday 18th January 2011
quotequote all
DannyVTS said:
TVR Beaver said:
CAS Powder Coating in Eccleshill Bradford.... Top job... Strip back, blast... re-powder all for £1 per inch!... other finishes available... but all they do are wheels... fantastic job
That's a bargain.

I've heard theres a good place in Featherstone and Castleford
The place in featherstone is KM Powdercoatings, he has done things for me in the past od done a good job. 4 15in wheels stripped and coated for £120, including removing and refitting tyres.

FlashBastd

312 posts

213 months

Wednesday 2nd February 2011
quotequote all
I use LSN Coatings in Castleford, £30/wheel for 17", great quality work, but he doesn't do tyres or centres.