Retrim of a 400SE
Discussion
I re-carpeted my 400 last year. I got D&C trim to supply the same carpet make that TVR originally used, but in a different colour. I removed the old carpets, and sent them to Blackpool for use as templates. This was not a perfect solution as A) my carpets were non-original, and not good quality / fitting and B) the variation across cars means that any template will only be a starting point. To be fair to D&C, what they supplied was very good, all properly bound edges where required. We only had to undo this edging on 2/3 pieces to trim the carpet, but you do need access to a decent sewing machine. There are some quite tricky sections to glue as well, e.g. the transmission tunnel and the outer footwells. Because they are so long, I had to glue in stages, but it tured out fine. I did also fit underlay, which made the job much longer. Happy to post some pics if wanted. Cost of the carpet was about £500, plus underlay plus glue.
Edited by Number 7 on Tuesday 24th May 09:40
KR said:
Looks good! So, roughly wot did it cost u for interior refurb then?
£600 for D&C to re-carpet, Veneers from HOTTY were (I think) £60 and then £10 worth of leather cleaner and feed. As I mentioned, fortunately the leather was in good condition so haven't needed to do that yet.I know D&C said something like £700 to re do the seats in new leather IIRC.
Hope this helps. Cheers David
Gassing Station | Wedges | Top of Page | What's New | My Stuff









