Front stick on TVR logo.

[taz turbo]

Does anyone know where I can get an ACCURATE stick on logo in black for the front of my Wedge. I had some paintwork done and I'm now on the second logo sticker, its again wrong!

Getting fed up, how difficult can it be to supply correct parts?

Chris.

[gralin69]

Dont know if you have tried these people says its the bonnet logo included
http://www.ebay.co.uk/itm/TVR-TASMIN-Stripe-decal-...

Sorry to hear you were the only wedge at Tatton Tark we were on the Chip shop run Wales on Sunday WWm & Staffs Shrops gang
Graham

Edited by gralin69 on Tuesday 23 August 20:55

[Mr Tank]

Hi

Try Racegraphics he does them and a quick turn round!

Andy

[taz turbo]

Thanks Guys,

This is a Pic. of the first on now on the front of the car, it only has three horizontal stripes at the top of the R...


This is a Pic. of a Racegraphics logo, the stripes are too wide in comparison to the gaps between the stripes, the Rad at the end of the R is too large and one of the straight line intersection points on the R is one stripe out...


Then there is the correct logo, all the logos I have checked are identical and this gives a good reference...


Any help greatly appreciated.

Chris.

[Viper]

Chris, if you can wait a few days i can produce one FOC using the .jpg youve posted up

Neil@Racegraphics

[taz turbo]

Viper said:

Chris, if you can wait a few days i can produce one FOC using the .jpg youve posted up

Neil@Racegraphics

Neil HYM.

Chris.

[Viper]

here you go Chris, ready for cutting tomorrow

[taz turbo]

^ A big thank you.

Chris.

[Mr Tank]

Hi

Proplem there all mine are from you!!!!!!!!!!!!

So not much good measuring mine!

Andy

[cello297]

Neil,

When you get there, could you please run off an extra one for me? Not after a freebie.... unless!

Hopeful thanks, Shane

[taz turbo]

Viper said:

can any of wedge guys please measure the length of your OE bonnet logo,
ive been led to beleive its 330mm wide ???

cheers

Could any Wedgers with the stick on badge measure the length at the longest point (bottom edge of the fouth line from the top)

I have been taking some measurements between the headlights of my car and my previous wedge then scaling from some good front end photographs, I'm making it between 312mm and 322mm from all the big pictures. As Neil (PH Viper) from Racegraphics has kindly agreed to remake them to the correct layout it would make sense to get it right.

Please could you guys measure yours if you think they may be OE.

Regards,

Chris.

Edited by taz turbo on Wednesday 24th August 23:54

Edited by taz turbo on Wednesday 24th August 23:55

[jock sproket]

mine measures 310 and from what i know of cars history it is original one so hopes this helps

loud n proud

sproket

[MJG280]

Many years ago before I scraped the Logo off I thought I would make a record. Never thought to check whether I would be able to read the measurements

[taz turbo]

We have two winners...

jock sprocket @ 310mm

and...

MJG280 after I realised your ruler is a 400mm ruler, the logo measures @ 310mm

Thanks guys, I guess I owe you both a beer (or is it a RN!)


Viper,

It appears from a couple of kind measurements and my scaling the logos are measuring at 310mm measured at the widest point (the lower edge of the fourth from top line)

Chris.

[taz turbo]

Viper,

Arrived today, spot on, a BIG thank you

Chris.

[Viper]

glad to help