400se clutch

[barrington]

can anyone give me details on clutch for a 400se and part numbers cheers

[wild rover]

I have just replaced the clutch on my 390se.Got all the parts from V8 Tuners.co.uk. The clutch they supply is the borg and beck spec. Borg and Beck Part no 53823.
Just to let you know the clutch can be replaced without moving the engine or cutting the frame, if you wish any further info e-mail me.

[barrington]

cheers that helps me the engine is already out as it has been rebuilt just needed a part number as the engine builder has a very large stock of cluches (NEW OLD STOCK) i just have to go and have a look

[pistolar]

Try RT Racing

[adam quantrill]

I used on off eBay in 2008 from Partsrange - cost £120, and it has done over 20k miles with no problems. As I have about more torques than you on the SX I'm sure you'll be OK with one. The friction plate was a "National" brand as I recall.

On mine the old friction plate was fine but the springs in the pressure plate had weakened with age so there was less grip and it started slipping badly.

[pistolar]

Might be worth trying Rimmer Brothers

[barrington]

cheers chaps and you neil (pistolar)

[pistolar]

barrington said:

cheers chaps and you neil (pistolar)

Glad i was of help!!