light pod motor grommets

[rocky65]

Any one know where I can get the rubber grommets that sit in the ring on the end of the light pod motor arm,the part that connects to the pod.Also I think I have something missing a ring or bezel around my lights just does not look finished, any pics anyone of how it should look?

Karl.

[gralin69]

These may be the ring you speak of dont know about rubbers though good luck
http://www.ebay.co.uk/itm/350313757638?ssPageName=...

Edited by gralin69 on Wednesday 5th October 17:14

[rocky65]

gralin69 said:

These may be the ring you speak of dont know about rubbers though good luck

Sorry ,do you have a picture?

[gralin69]

Short cut added sorry karl

[cerberatony]

i tried fitting that type of ring but there is no way of getting a screwdriver on to the screw due to it being recessed into pod, i would be interested in the answer to this one

[hallsie]

Mine are made out of glass fibre, and came in the boot of the car two years ago..

I also am still trying to work out how the hell they fit as the screw recesses are nowhere near the lamp retaining screws......

Stu

[mrzigazaga]

The lense in my pod pops out via three small socket type fittings..What about fitting the bezel edge around the lens then popping it back in..Just be sure to use a cloth over whatever you use to pop them back out again..If and when needed..Ziga

[GV]

rocky65 said:

Any one know where I can get the rubber grommets that sit in the ring on the end of the light pod motor arm,the part that connects to the pod.Also I think I have something missing a ring or bezel around my lights just does not look finished, any pics anyone of how it should look?

Karl.

Halfords sell grommets - you will need a couple of packets as they are mixed sizes.