Rear Driveshafts

[hodge]

I've got a rather poorly driveshaft ( the bit with the yoke at one end and the large nut at the other, that goes through the rear hub and is splined to the drive flange ).

Does anyone know what car this came off?

Any help appreciated

Hodge.

[shpub]

TVR special. About £450 for a new set. Find a crapped car or talk to RT Racing in Sheffield who might be able to refurb.

[rev-erend]

Posh car breakers : www.douglasvalley.co.uk/

I'd try an refurb what you have unless there is a big problem with them.

[york33]

what's up with it? not just a dead UJ is it?

Dave

[Graham]

proptech at Hartlebury trading estate nr kidderminster

are the place that made them originaly and providing the spline on the hub end are ok they should be able to rebuild them for you for a shed load less than 450 quid !!!!


they've rebuild mine on the taz racer and about 1/3 dozen more...


which reminds me i've got a bit ov movment on one of mine...



G

[tasmania]

Output flange is granada.
Use proptech as Graham sais - they did them originally - standard refurb will be £50-£100, making the shaft into the 400 size will be around £200 each. Use those 'specialists' in our cars, only for refurb and changes to standard bushes - IMHexperience!! Any tricky stuff go to proptech.
Proptech : 01299-251247
TaS