Discussion
Hi all,
I'm looking for an
Can anyone help with a wiper arm and/or speedo drive for the Tasmin (four speed gearbox)?
It should be MoT'd within the next week or so.
We have been working on it for 2 1/2 years and it was never on the road for the previous owner - 5 years, so I really don't want these to hold it up!
Thanks chaps and chapesses, Shane
methinks a bit of liquid will pass the lips when this happens!
I'm looking for an
Can anyone help with a wiper arm and/or speedo drive for the Tasmin (four speed gearbox)?
It should be MoT'd within the next week or so.
We have been working on it for 2 1/2 years and it was never on the road for the previous owner - 5 years, so I really don't want these to hold it up!Thanks chaps and chapesses, Shane
methinks a bit of liquid will pass the lips when this happens!In case it helps ....
There are a range of speedo drive wheels for Ford gearboxes, they were used to calibrate the gearbox for the speedo. I believe all Ford gearboxes were set up for 1000 turns per mile.
I'm pretty sure that the 4 speed boxes come from a 3.0 or 2.8 Capri.
They were also used in stuff like the Scimitar - perhaps those parts suppliers may have one ?
The 5 speed drive *might* be the same, haven't been able to confirm. May still be available. Again try a 2.8i Capri.
There are a range of speedo drive wheels for Ford gearboxes, they were used to calibrate the gearbox for the speedo. I believe all Ford gearboxes were set up for 1000 turns per mile.
I'm pretty sure that the 4 speed boxes come from a 3.0 or 2.8 Capri.
They were also used in stuff like the Scimitar - perhaps those parts suppliers may have one ?
The 5 speed drive *might* be the same, haven't been able to confirm. May still be available. Again try a 2.8i Capri.
Edited by RCK974X on Friday 27th April 21:36
Still looking for chuffing bits though Andy!
Gassing Station | Wedges | Top of Page | What's New | My Stuff