Knackered H/brake
Discussion
You can manually adjust the handbrake calipers to get some effectiveness back, they are sposed to self adjust but rarely work.
Jack the car up so you can see the caliper over the top of the wheel through the wheelarch.
reach in over the wheel and remove the split pin that stops the adjuster screw from rotating
Pull the actuator lever back towards the wheel arch (ensure the handbrake is off)
Screw the adjuster in tight then back off 1/2 a turn and replace the split pin.
Repeat the other side
Voila a reasonable handbrake for at least the next 100 miles......
Matt
Jack the car up so you can see the caliper over the top of the wheel through the wheelarch.
reach in over the wheel and remove the split pin that stops the adjuster screw from rotating
Pull the actuator lever back towards the wheel arch (ensure the handbrake is off)
Screw the adjuster in tight then back off 1/2 a turn and replace the split pin.
Repeat the other side
Voila a reasonable handbrake for at least the next 100 miles......
Matt
jeff m said:
Handbrake bits
Does anybody know what years to quote to a spares guy
if buying from a Jaguar dealer.
Jeff
XJ6 from around 1975-1979. All Caliper bits are standard. Handbrake cable I believe is a special.
Couple of good sources are :
Classic Automotive, Chelford, 01625 860910
John Gordon, Jag Specialist, Accrington, 01254 398476
Gassing Station | Wedges | Top of Page | What's New | My Stuff




