Is this engine suitable from parts for my 350i

[ralph350i]

Hi Guys
Well need a set of pistons and possibly a crank, would this block provide the correct parts please.

http://www.ebay.co.uk/itm/Rover-3-5-V8-engine-bloc...

Cheers

Ralph

[adam quantrill]

I would guess the pistons are interchangeable but cranks can vary depending on the spigot bearing at the gearbox end and the oil seals.

It's worth it just for the pistons at that price and you can roll the dice on the crank, and sell what's left over on the flea...

[gromit wedge]

V8 coffee table? stand it up and its a V8 wine bottle holder? After you use the internals for your engine.

[Barkychoc]

Don't forget the block will have some scrap value

[Jack Valiant]

As mentioned worth it for the pistons, sure that you will find lots of bits on the engine that you can use / better that yours worth a punt I would have thought, give the guy an email and have a chat with him fella!

Chris

[TVRleigh_BBWR]

adam quantrill said:

I would guess the pistons are interchangeable but cranks can vary depending on the spigot bearing at the gearbox end and the oil seals.

It's worth it just for the pistons at that price and you can roll the dice on the crank, and sell what's left over on the flea...

The spigot bearing are changeable, so the crank should be fine also.

[ralph350i]

Many Thanks for all the replies guys
Have brought the lump for £60.00 so all in all a good deal

Cheers

Ralph

[vampire222]

ralph350i said:

Many Thanks for all the replies guys
Have brought the lump for £60.00 so all in all a good deal

Cheers

Ralph

Wow that's a crazy good deal