Zig getting a blow job!
Discussion
Hi
Well our Zigmister is soon going to be supercharged (If he didn't need that already)
He has bitten the bullet and got himself a supercharge kit for his car!
So we should now for the next six months to a year hear all about all the fun he will have in fitting it, then braking his car etc, etc!
Good luck mate I hope it goes well!
If the end result is you make more BHP on the RR at next years fest then it will be worth it!
Andy
Well our Zigmister is soon going to be supercharged (If he didn't need that already)
He has bitten the bullet and got himself a supercharge kit for his car!
So we should now for the next six months to a year hear all about all the fun he will have in fitting it, then braking his car etc, etc!
Good luck mate I hope it goes well!
If the end result is you make more BHP on the RR at next years fest then it will be worth it!
Andy
I like the title of the thread..
..Although it will probably get changed....
..Yes Andy is right, After the appalling RR results at last years fest i have decided to supercharge delilah..Its a kit that bolts straight on..No..Not a strap on!!..And should push the bhp up to around 240 and the torque to 280+...Im having her tuned this week and tested to make sure she dont blow instead of suck..And next year i will be having machined alloy three port heads with big valves/Porting/Polished..Steel cam gear and a specially profiled cam...The supercharger can be adjusted to give more boost if needed...ooo im so excited.....Ziga
..Although it will probably get changed......Yes Andy is right, After the appalling RR results at last years fest i have decided to supercharge delilah..Its a kit that bolts straight on..No..Not a strap on!!..And should push the bhp up to around 240 and the torque to 280+...Im having her tuned this week and tested to make sure she dont blow instead of suck..And next year i will be having machined alloy three port heads with big valves/Porting/Polished..Steel cam gear and a specially profiled cam...The supercharger can be adjusted to give more boost if needed...ooo im so excited.....Ziga
Hi peeps...Went and got a capri power steering pump and bracket as the existing one will have to go...Thought id clean it up and paint it..Having the car tuned tomorrow so will post up the power runs..Will also ask as regards to them fitting the supercharger if all is ok..probably wont be until next month though..Might give the three port heads a miss and just have mine fitted with big bore valves/ported/polished and get a new manifold made from either mild or stainless and hopefully made a bit bigger to accomodate the extra gases being expelled..Spoke to neil at racegraphics reagrding making up some NEW decal's..Just got to decide what to call her..One suggestion was an SX280i but im thinking more of a fun one like a 280iMF..Which stands for mother f
ker!!...
..Not sure yet ....
ker!!.....Not sure yet ....
.......chedder said:
I can see the Zigmeister getting the award for most posts on Pistonheads for the next year!
HiI think Zig gets that now!
He been on the forum for just over 2 years and in that time he has done over 4,600 post's that an avarage of over 6 a day!
So Zig you need to get a life and a job!
Then you will not have so much time to spend on the forum!
Andy
Edited by Mr Tank on Wednesday 22 August 00:45
Gassing Station | Wedges | Top of Page | What's New | My Stuff