Need a favour with someone with 16" split rims

[stainless_steve]

I'm fitting some big brakes to my car,could you measure the inside of the rim for me please to give me an idea what size disc i can go for

[rev-erend]

Steve,

I had hoped someone would reply to your request ..

I have 16 inch OZ on the back of my car..and can take one off to measure it.

Where do you want the measurement at inner Rim / narrowest part .. which I presume will be near the spokes.

[TVRleigh_BBWR]

stainless_steve said:

I'm fitting some big brakes to my car,could you measure the inside of the rim for me please to give me an idea what size disc i can go for

I've got 303mm disc's with AP Racing 4 Pot calipers (same as Cerb. & T-Cars) and they fit under the 16" wheels

Not sure you get anything bigger to fit.

[rev-erend]

Don't forget to allow for the stick on balance weights..

[stainless_steve]

Thanks Leigh and Alan,i was hoping i could go a little larger,i have the AP calipers 6600 also.

[stainless_steve]

rev-erend said:

Steve,

I had hoped someone would reply to your request ..

I have 16 inch OZ on the back of my car..and can take one off to measure it.

Where do you want the measurement at inner Rim / narrowest part .. which I presume will be near the spokes.

I'm going to give Image a ring Alan so i should be ok,i'm buying the wheels off them so it would be sensible to check with them.
Hows the SEAC coming along?

[rev-erend]

Been getting the heads ready to put the 48mm throttle bodies back on.

Need to redo the tappets .. I set them to 10thou but just found out they should be 6 thou.

I have already run in the cam and it now starts easily.

[stainless_steve]

Nice one,when will you have the monster on the road?

[rev-erend]

Working towards it..

Need to resolve the engine issues first and get an initial engine map done, then get the electric PS pump mounted somewhere and plumbed in.

[Number 7]

stainless_steve said:

I'm going to give ***** a ring Alan so i should be ok,i'm buying the wheels off them so it would be sensible to check with them.

I would recommend extreme caution.
http://www.pistonheads.com/xforums/topic.asp?h=0&a...

[stainless_steve]

I forgot about that thread