At last it is running below 3000 rpm
Discussion
Well had a fiddle this evening and reset everything as per the data I've collected over the last few weeks and it is now running below 3000 rpm - Horay the neighbours are saying !!
Simple enough problem, working in my garage you can only get to the drivers side of the car easily, so everytime I took the afm hose of I could never see inside the plenum
Had I been able to I would have seen the throttle gap had been set to about 10mm in stead of .05mm
Now put another plenum on and it started and ran. so now able to get on with the job of tidying up and getting everything else set up as best as able to.
Then put the larger plenum and afm back on and hopefully will still be running.
Simple enough problem, working in my garage you can only get to the drivers side of the car easily, so everytime I took the afm hose of I could never see inside the plenum
Had I been able to I would have seen the throttle gap had been set to about 10mm in stead of .05mm
Now put another plenum on and it started and ran. so now able to get on with the job of tidying up and getting everything else set up as best as able to.
Then put the larger plenum and afm back on and hopefully will still be running.
Gassing Station | Wedges | Top of Page | What's New | My Stuff