No chance i'd imagine but ya never know!

[dixiebabes]

I need the retaining screw cap thingy that holds the electric Ariel in place on top of the rear wing and screws down onto the body of the ariel itself. Don't suppose anyone out there has one or who knows where i can get one. Can Zoogle come up trumps again?

[Danny Hoffman]

Have you got a photo and some dimensions?

I have a box of old aerial bits somewhere, might have one to fit. I'm assuming TVR didn't use the same electric aerial in all wedges

[dixiebabes]

Hi Danny its off a 1983 350i no makers name on the body of the ariel but here's a few photos cheers buddy!!

Dix



Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us

[Danny Hoffman]

I'll try and look tomorrow. Do you need all 3 bits (nut, black plastic swivel and metal cap)?

Danny

[dixiebabes]

Danny Hoffman said:

I'll try and look tomorrow. Do you need all 3 bits (nut, black plastic swivel and metal cap)?

Danny

Yes please Danny i lost all of them together on a run out, your a star sir.

Dix

P.S I will be out of the country for a week or so late tomorrow so if i don't reply straight away i'm not ignoring you bud.

[mrzigazaga]

dixiebabes said:

Can Zoogle come up trumps again?

Hi Mate...I did do a little search but most fitting kits come with the actual ariel..Looks like ive been stumped......

[adam quantrill]

If Danny can't find one I might have a busted one that I swapped out (trapped the aerial under the boot) which might have the bit you need.

[dixiebabes]

Thats probs what I would need cheers adam. If I can get sorted ill email you when I get back in the country. Thanks

Dix

[Danny Hoffman]

I've found my box of bits and I have 2 different sizes of nuts, neither of which are the same as the aerial fitted to my '85 350i.

The hole on one is 7mm, the other is 14mm. Looking at your photo you need one that is just over 8mm.

Happy to send you these and the other bits I have which I'm sure will be fine, and just send me back what you don't use.

PM me your address

Cheers

Danny