Decal replacement ..
Discussion
Hi Chris...Im sure WD40 removes them easily...Here is a video of someone re-fitting if it helps...cheers...Ziga
http://www.google.co.uk/url?sa=t&rct=j&q=a...
http://www.google.co.uk/url?sa=t&rct=j&q=a...
Chris,
I watched the video. In my opinion he used far too much liquid. There is also no need to use a fancy application liquid. Just get an empty spray bottle, use water with a few drops of detergent (shampoo is good) and you will be able to adjust the decal.
I suggest you use painter's tape to get the alignment, with a mark corresponding to some point on the decal. I put the painter's tape about 1/8th inch below here you want the decal to go. If the decal doesn't have something to line up, you can use several pieces of tape.
Try to get a squeegee from the decal supplier; you can use a credit card, but there is a small chance you will damage the vinyl.
As the video says, you must get rid of the bubbles. As a last resort you can prick the bubble with a needle and smooth it over.
Wilf.
I watched the video. In my opinion he used far too much liquid. There is also no need to use a fancy application liquid. Just get an empty spray bottle, use water with a few drops of detergent (shampoo is good) and you will be able to adjust the decal.
I suggest you use painter's tape to get the alignment, with a mark corresponding to some point on the decal. I put the painter's tape about 1/8th inch below here you want the decal to go. If the decal doesn't have something to line up, you can use several pieces of tape.
Try to get a squeegee from the decal supplier; you can use a credit card, but there is a small chance you will damage the vinyl.
As the video says, you must get rid of the bubbles. As a last resort you can prick the bubble with a needle and smooth it over.
Wilf.
...
..Seriously though they look the dogs..And that small TVR union jack..I mean flag badge looks the part also...Ziga
Gassing Station | Wedges | Top of Page | What's New | My Stuff